Tillers aren't just soil churning machines, they collect plenty of soil on their travels too. Here is how to clean a cultivator or tiller in nine simple steps.

Cleaning a garden tiller checklist

Cleaning the blades after every use will prolong the lifespan of your tiller, continue the storage area clean for your tiller and ensure a smooth fast operation. Dirty tillers with damaged blunt blades which are clogged upwardly with roots volition not only perform poorly and be frustrating to use but tin can identify an unnecessary strain on the engine causing stalls and damage.

Protect your easily

You will be dealing with abrupt blades, then remember to always protect your hands when cleaning your tiller by wearing thick gloves.

Switch off the engine

Prior to cleaning your tiller ensure that the engine is switched off and there is no danger of it accidently being turned on by unplugging the cablevision of an electrical tiller or removing the bombardment of a cordless electric tiller. Some tillers have the option to lock the blades as an actress precaution.

Read the instructions

Consult with the manufacturer'due south instructions on how to make clean the tiller safely forth for whatever supplemental cleaning instructions relevant to your model.

Brush off dry soil

Dry soil can easily exist removed using a stiff brush or past mitt with gloves.

Rinse off mud

Damp clumpy soil which is clinging to the blades and drag bar on the tiller may require carefully rinsing with a garden hose, always utilize a controlled slow trickle of water to reduce the chance of the water going near the engine.

Remove vegetation

Roots, weeds or long grass which have been tangled in the tines and axle can exist removed using a precipitous pocketknife, long nose pliers or needle nose pliers.

Dry

When using water to make clean the tines always dry out them afterwards with a fabric or towel to preclude rusting.

Inspect

Use the opportunity to inspect the tiller blades for whatever signs of damage and blunt blades. Well-nigh steel blades are coated with a durable thick pigment treatment to help prolong the lifetime of the metal, however this paint tin be chipped against rocks and stones making it susceptible to rust. Bank check cables powering electric tillers for damage and await to repair or replace these before using the tiller again. Check that the tyres on the tiller are fully inflated with no signs of a puncture.

Oil

When storing the tiller for extended periods of time and are limited by the amount of storage infinite you take bachelor it may be worth removing the blades for a thorough clean, coating them with oil such as WD40 then storing them separately. Gas powered tillers will need boosted oiling for both parts and as well replacing engine oil.

  • 1 Cleaning a garden tiller checklist
    • i.1 Protect your easily
    • one.2 Switch off the engine
    • i.3 Read the instructions
    • 1.4 Castor off dry soil
    • ane.5 Rinse off mud
    • 1.6 Remove vegetation
    • 1.7 Dry out
    • 1.viii Inspect
    • 1.9 Oil
  • two How often do I clean roots from tiller tines?
  • 3 What is the best way to remove grass from tiller tines?
  • 4 Can I supercede the tines on a tiller?
  • v Contacting your tiller manufacturer
  • 6 Sources

How often practice I make clean roots from tiller tines?

To prolong the life of your tiller and prevent stress on the tines you lot should clean your tiller after every use. If y'all observe that you are pulling out lots of roots from your tiller tines information technology could be that the soil is also wet, damp ground makes information technology easier for the tines to pull out roots from the soil.

What is the best way to remove grass from tiller tines?

If you cannot remove grass from tiller tines by hand then try a sharp knife, long nose pliers, needle nose pliers or a stiff brush, remembering to cut all ability to the tiller first and wear gloves.

Can I replace the tines on a tiller?

Blades are probably the nearly common part of a tiller to be replaced, when purchasing a new tiller it is prudent to check the availability of spare tiller tines from the manufacturer and buy a backup ready if upkeep allows. In the situation where you break a tine and replacements accept been discontinued by the manufacturer your only choice will exist to purchase an entirely new tiller.

Contacting your tiller manufacturer

Contact the retailer, supplier or manufacturer when y'all need to replace a part on your tiller, for your convenience here are a listing of popular tiller manufacturers support pages with contact details for client services.

Manufacturer Support Client services
BCC BCC Support i-800-543-1040
Craftsman Craftsman Support 888-331-4569
DR DR Support i-802-737-7984
Convulsion Earthquake Support Contact online
Honda Honda Support 770-497-6400
Husqvarna Husqvarna Back up Contact online
Mantis Mantis Support 1-800-366-6268
MacKissic MacKissic Support i-800-348-1117
Remington Remington Back up 866-206-2707
Simplicity Simplicity Support 1-844-339-9201
Troy-Bilt Troy-Bilt Back up 1-800-828-5500

Sources

  • toptillers.com – Tiller Maintenance And Troubleshooting – All of your questions answered about tiller maintenance and troubleshooting and some common malfunctions the tool may face. fourth October 2022.
  • tractorbynet.com – How frequently do you make clean roots from tiller tines? –19th July 2022.
The Laughing Seed
  • Tiller buyers guide: What to look for in a garden tiller
  • Front tine vs rear tine tillers – which is best?
  • Front tine tillers
  • Rear tine tillers
  • Electric tillers
  • How to prepare for using a garden tiller
  • How to clean a tiller or cultivator